Follow FUBANG’s development through product testing, engineering applications and quality management. The timeline below presents the complete public history, with relevant technical documents linked where available.
About FUBANG
Engineering experience, cabinet manufacture and project-specific electrical systems
Established in 1999 in Mianyang, China, FUBANG designs and manufactures electrical power systems, switchgear and control equipment for power and industrial applications. Its work brings together project-specific engineering, cabinet manufacture and equipment supply.
Company background
Mianyang Fubang Electronic Control Equipment Co., Ltd. was established on 4 June 1999 and is based in the Mianyang Economic Development Zone, Sichuan, China. Its product range covers DC power supplies, integrated AC/DC station power, switchgear, distribution equipment and control cabinets.
For project-based power systems, FUBANG reviews the buyer’s electrical requirements before developing a configuration. Both parties agree the technical design and supply scope before implementation.
Engineering expertise
FUBANG’s engineering work combines power electronics, electrical automation, computer and control technology, mechanical manufacture and electrochemical applications. These disciplines support station DC supplies, rectifier and battery arrangements, integrated AC/DC systems and electrical cabinet assemblies.
Start with the equipment duty, incoming supply, load requirements and installation conditions. FUBANG uses these requirements to discuss the configuration, interfaces and engineering responsibilities for your project.
Product development and manufacturing
The product range includes GZG10 DC power systems, DY integrated AC/DC systems, telecom power, industrial rectifiers, UPS and EPS equipment, and medium- and low-voltage electrical assemblies. Each family has its own selection requirements, configuration options and operating conditions.
FUBANG’s product development has also included excitation supplies, temperature fault positioning, power-quality equipment and electric-vehicle charging. For a new purchase, the products and configurations available are reviewed against your requirements.
FUBANG has a dedicated quality-management department. Its technical documentation includes ISO 9001, ISO 14001 and ISO 45001 management-system certificates, together with type-test reports for selected DY integrated AC/DC, GZG10 DC and UPS configurations.
Buyers can review the certificate and report previews below, then request the documents relevant to their selected equipment. The applicable documentation and inspection requirements are reviewed as part of technical discussions.
FUBANG equipment has been exported to Indonesia, Vietnam, Pakistan, Myanmar, Ethiopia, Laos, Uzbekistan, Turkey, Nepal, Iraq, Azerbaijan and Cambodia. Applications include grids and substations, power generation, wind and solar projects, telecommunications, petrochemicals, steel and cement production.
FUBANG has supplied electrical power equipment through Chinese EPC contractors for international projects. Project planning, product design, installation guidance and operation and maintenance support are agreed within the project and contract scope. Delivery schedules and arrangements are agreed for each order.
Company history
Follow FUBANG’s development in electrical power systems, manufacturing and project support, from its establishment in 1999. Open an event for more detail and relevant documentation.
1999–2003
Early technology and establishment
FUBANG established in Mianyang
FUBANG was established on 4 June 1999 in Mianyang, Sichuan, China. DC power supplies and electrical assemblies formed the foundation of its business.
Read the full account
Mianyang Fubang Electronic Control Equipment Co., Ltd. was established on 4 June 1999 and is based in the Mianyang Economic Development Zone. Its work in DC supplies and electrical assemblies developed into a business combining power-system engineering, cabinet manufacture and project-based equipment supply.
In August 1999, GZG10 and GZG11 microcomputer-based DC power cabinets passed type testing. Testing was carried out at the National Relay Quality Supervision and Testing Center.
Read the full account
The August 1999 type tests covered GZG10 and GZG11 microcomputer-based DC power cabinets at the National Relay Quality Supervision and Testing Center. These early DC cabinet tests precede the later GZG10 configuration-specific reports available in the document gallery. Test documentation for a current order is matched to the selected equipment.
In October 1999, the GZG series passed a joint product-production appraisal. The appraisal was organised by the Sichuan Provincial Department of Machinery and the Sichuan Provincial Electric Power Bureau.
Read the full account
The October 1999 appraisal concerned production of the GZG series of microcomputer-based DC power cabinets. The Sichuan Provincial Department of Machinery and the Sichuan Provincial Electric Power Bureau jointly organised the assessment. It followed the GZG10 and GZG11 type tests carried out earlier that year.
Recommended enterprise for the grid-modernisation programme
In 1999, FUBANG was included in the third group of enterprises recommended for urban and rural electricity-grid modernisation. The recommendation was issued under the State Economic and Trade Commission’s programme.
Read the full account
FUBANG joined the third group of recommended enterprises under the State Economic and Trade Commission’s urban and rural grid-modernisation programme in 1999. The programme was part of the company’s early involvement in power-sector equipment supply. This dated recommendation belongs to that specific programme.
FUBANG first obtained ISO quality-management-system certification in 1999. Quality management became part of the company’s development alongside its DC power equipment business.
Read the full account
The company’s first ISO quality-management certification dates to 1999. The more recent ISO 9001 certificate shown in the gallery states an initial certification date of 2 February 2023 and an issue date of 26 December 2025. Buyers can inspect the certificate and its stated activities and validity period.
FUBANG received Sichuan high-tech enterprise recognition in 2000. The recognition followed its early work in DC power equipment and electrical assemblies.
Read the full account
The Sichuan high-tech enterprise recognition was awarded in 2000. At that stage, FUBANG’s product history included GZG10 and GZG11 type testing and the GZG production appraisal completed in 1999. The provincial recognition forms part of that early period of technical and business development.
The FUBANG trademark was registered in 2003. The registration established a brand identity for the company’s electrical equipment business.
Read the full account
The FUBANG trademark was registered in 2003 for the company’s electrical equipment business. It followed the DC cabinet tests, production appraisal and quality-management certification completed during the company’s early years.
FUBANG began exporting products in 2006. Its overseas markets have included Southeast Asia, West Asia, North America, Africa and Europe.
Read the full account
Export activity began in 2006 and developed across Southeast Asia, West Asia, North America, Africa and Europe. International power-equipment supply has also included cooperation through Chinese EPC contractors. The markets and project applications described on this page reflect that equipment-supply experience.
Two GZG10 Attestations of Conformity were issued on 5 March 2007 by China CEPREI (Sichuan) Compliance Laboratory. They address low-voltage and electromagnetic-compatibility requirements for the assessed specimen.
Read the full account
The two 2007 documents concern the identified GZG10 specimen. The low-voltage attestation is associated with report 252334970 and the electromagnetic-compatibility attestation with report 252334971. These historical, model-specific documents can be viewed in the gallery; current product conformity is reviewed against the equipment required for an order.
The FUBANG trademark received Sichuan famous-trademark recognition in 2009. This dated honour forms part of the company’s brand history.
Read the full account
Sichuan famous-trademark recognition was awarded to the FUBANG brand in 2009. The brand had been registered in 2003, and overseas equipment exports had begun in 2006. Together, these dated events describe the development of the company’s identity and markets during that period.
In 2011, FUBANG’s integrated AC/DC power supply passed type testing. The test was carried out at the National Relay Supervision and Testing Center.
Read the full account
The 2011 type-test milestone concerned an integrated AC/DC power supply, extending the product history beyond individual DC cabinets. It was carried out at the National Relay Supervision and Testing Center. Later configuration-specific DY10 test documents from 2024 are available in the gallery for buyers reviewing integrated station-power equipment.
An electric-vehicle charger passed type testing in 2015. Testing was carried out at the National Quality Supervision and Inspection Center for Intelligent Microgrid Control Equipment and Systems.
Read the full account
The 2015 test concerned an electric-vehicle charger and was carried out at the National Quality Supervision and Inspection Center for Intelligent Microgrid Control Equipment and Systems. It is part of FUBANG’s product-development history alongside its station-power equipment. Current product availability is discussed for each procurement.
FUBANG’s historical patent total includes 30 grants accumulated from 2015 onwards. This is a historical grant count, rather than a statement of the number of rights currently in force.
Read the full account
The historical total of 30 patent grants covers development from 2015 onwards. It describes grants during the period covered by the company’s history. For a procurement involving a particular technology, individual patent details, ownership and current legal status can be reviewed with the relevant technical documentation.
Steel-industry operation and maintenance cooperation
In September 2017, FUBANG entered a long-term operation and maintenance cooperation agreement with a steel-industry group. The cooperation concerned industrial electrical operation, maintenance and technical support.
Read the full account
In September 2017, FUBANG signed a long-term operation and maintenance cooperation agreement with a steel-industry group. The agreement concerned industrial electrical operation, maintenance and technical support. Service responsibilities for new projects are agreed within the relevant contract scope.
FUBANG entered the technology-based small and medium enterprise database in 2019. This registration forms part of its enterprise-development history.
Read the full account
In 2019, FUBANG was entered into the technology-based small and medium enterprise database. The entry sits alongside its product-development, patent and industrial-service milestones. Buyers seeking present-day qualification documents can use the documentation enquiry to request information relevant to their procurement.
By December 2020, a temperature fault-positioning system had three years of power-sector application experience. FUBANG’s development work in this area includes electrical monitoring and fault positioning.
Read the full account
By December 2020, the temperature fault-positioning system had three years of application experience in the power sector. FUBANG’s related development work also includes the FTZ6001D temperature fault intelligent positioning system.
FUBANG received the “2022 Outstanding Enterprise in Solar Photovoltaic Power Station Design” industry honour. The award recognises the company within the solar-sector supplier recommendation and review activity.
Read the full account
The 2022 award names FUBANG as an Outstanding Enterprise in Solar Photovoltaic Power Station Design. It belongs to the solar-sector supplier recommendation and review activity identified on the plaque. This is an industry honour for that year, distinct from an engineering-design licence. The original plaque is available in the gallery.
Occupational health and safety management certification
Occupational health and safety management certification began on 2 February 2023. The ISO 45001 certificate shown in the gallery was issued on 26 December 2025 and states validity until 25 December 2028, subject to surveillance requirements.
Read the full account
ISO 45001 certificate 25825S0455R1C covers occupational health and safety management for the listed design, development, assembly and sales activities. Its initial certification date is 2 February 2023; this issue is dated 26 December 2025, with validity stated until 25 December 2028 subject to surveillance requirements. It is a management-system certificate.
In November 2023, FUBANG received Sichuan specialised, refined, distinctive and innovative SME recognition. The stated recognition period runs from 1 November 2023 to 31 October 2026.
Read the full account
The Sichuan Provincial Department of Economy and Information Technology awarded the specialised SME recognition for the period 1 November 2023 to 31 October 2026. Any renewed status after 31 October 2026 is subject to updated documentation.
ISO 14001:2015 environmental-management certificate 258248ER0123R1S was issued on 3 June 2024. It states validity until 2 June 2027, subject to surveillance and current-status checks.
Read the full account
Certificate 258248ER0123R1S covers environmental-management activities associated with the electrical-equipment operations stated on the document. Its scope distinguishes design, development and assembly from sales activities. Issued on 3 June 2024, the ISO 14001:2015 certificate states validity until 2 June 2027, subject to surveillance and current-status checks.
DY10 integrated AC/DC, GZG10 DC and FBDU1105-220V UPS configurations underwent type testing at Xuchang KETOP Testing Research Institute Co., Ltd. Reports JW243766 and JW243765 were issued on 23 December 2024; JW243764 was issued on 20 December 2024.
Read the full account
The tested configurations were DY10-200AH/220V/40A-U5K/220V-D48V/60A, GZG10-200Ah/220V/40A-M and FBDU1105-220V. Xuchang KETOP Testing Research Institute Co., Ltd. issued reports JW243766 and JW243765 on 23 December 2024 and JW243764 on 20 December 2024. The gallery provides cover and first-page excerpts for those configurations; full reports can be requested for technical review.
Dates identify the period of each historical milestone. For a current purchase, review the relevant certificate, product configuration and applicable document scope in the gallery.
